Load of product to be Sterilized Product heating by heated Water circulating inside the jacket and by internal fans preventing stratifiction which make heat exchange easier. Pre- vaccum with value that can be automatically set up to 40mba (4kpa) max.Vacuum leak test of the chember before gas inlet Product conditioning by humidification up to preheated and vaporized gas up to a selected pressure value Sterilization with gas pressure Constant holding for a preset time (up to 24 hours) flushing by gas evacuation throught vaccum pump and Sterile air inlet (pulsations) for a prefixed number of times. |
1) J.B. autoclave will be in sturdy Construction Using plates of appropriate thickness which prevents bucking under vacuum or bluging due to pressure. |
2) Fully automatic by means pf PLC base controls ,which operate pneumatically actuated, solenoid valves Provision of four different cycles and programs |
| Heat up - ster hold (121°C) - exhaust |
| Heat up - ster hold (134°C) - exhaust |
| Fully Automatic Autoclave |
Double Walled inside made of thick Stainless steel and out side mild steel atterective Finished. The lid is mad of heavy s.s.Casting provided with a pressure gauge safety valve and steam release cock. Maximum operating pressure is 22 p.s.i.(adjustable) Working pressure 15 (psi) |